Products Amplifier Precision OpAmps
Products
Category
Analog to Digital Converter(ADC)
Digital to Analog Converter(DAC)
RF Transceiver
Sensors
Controller
Amplifier
Analog Switches Multiplexers
Interface
Logic Gates
Power Management
Real Time Clocks
Monitoring Circuit
Digital Isolator
Darlington Transistor
Hide Sidebar
CD8333
Precision OpAmps
Low power, precision, zero drift, single channel operational amplifier
Active | Production cycle：
Sample Sample
  
Datasheet Datasheet
CAD Model CAD Model
Buy Buy
Description
The CD833X series amplifiers include CD8333, CD8336, and CD8339, which are single/dual/quad operational amplifiers, micro-power, zero-drift CMOS operational amplifiers, the amplifiers offer bandwidth of 350 kHz, rail-to-rail inputs and outputs, and single-supply operation from 1.8V to 5.5V. CD833X uses chopper stabilized technique to provide very low offset voltage (less than 10µV maximum) and near zero drift over temperature. Low quiescent supply current of 25µA per amplifier and very low input bias current of 20pA make the devices an ideal choice for low offset, low power consumption and high impedance applications. The CD833X offers excellent CMRR without the crossover associated with traditional complementary input stages. This design results in superior performance for driving analog-to-digital converters (ADCs) without degradation of differential linearity.
The CD8333 is available in SOT23-5, SC70-5 and SOP8 packages. And the CD8336 is available in SOP8, MSOP8 and DFN-8 packages. The CD8339 Quad is available inGreen SOP-14 and TSSOP-14 packages. The extended temperature range of -40℃ to +125℃ over all supply voltages offers additional design flexibility.
  • Channel:1 
  • Offset Voltage : 10 uV
  • Input Bias Current:20 pA
  • Input Voltage Noise Density:70 nV/sqrt Hz
  • Supply: 2.7 V to 5.5 V
  • Gain Bandwidth Product: 350KHz
  • Slew Rate:0.2 V/μs
  • Common-Mode Rejection Ratio:110 dB
  • Output type: Rail-to-Rail


  • Single-Supply Operation from +1.8V ~+5.5V

  • Rail-to-Rail Input / Output

  • Gain-Bandwidth Product: 350KHz(Typ.@25℃)

  • LowInput BiasCurrent: 20pA(Typ.@25℃)

  • Low Offset Voltage: 10uV (Max. @25℃)

  • Quiescent Current: 25µA per Amplifier(Typ)

  • Operating Temperature: -40°C ~ +125℃

  • Zero Drift: 0.05µV/°C (Typ)

  • Embedded RF Anti-EMI Filter

  • Small Package:

  • CD8333 Available in SOT23-5, SC70-5 and SOP-8 Packages

  • CD8336Available in SOP-8, MSOP-8 and DFN-8 Packages

  • CD8339 Available in SOP-14 and TSSOP-14 Packages


  • Transducer Application

  • Temperature Measurements

  • Electronics Scales

  • Handheld Test Equipment

  • Battery-Powered Instrumentation


Parameters
MALL MALL

Part Number
Package
Channel
Supply Voltage (Min)(V)
Supply Voltage (Max) (V)
Offset Voltage (Max@25°C) (mV)
Iq/ Amp Typ (μA)
IB Typ(pA)
Rail-to-Rail I/O
ENOISE Typ@1kHz (nV/√Hz)
TC of Vos Typ(μV/°C)
GBW Typ(MHz)
Slew Rate Typ (V/μs)
Aol Typ(dB)
CMRR Typ(dB)
In Noise (μVpp)
Additional Feature
Temp Range(°C)
Open
CD8333AS8
CD833X 系列放大器包括 CD8333, CD8336, CD8339，分别是单/双/四路运放，具有微功耗、零漂移特性的 COMS 运算放大器，该放大器提供 350 kHz 带宽，轨至轨输入输出和单电源供电，供电范围从 1.8V 到 5.5V。CD833X 使用斩波稳定技术提供低失调电压（最大电压小于 10µV）、超过工作温度时接近零漂移。其每个放大器20µA 的低静态电源电流和低至 20pA的输入偏置电流，是满足低偏移、低功耗、高阻抗应用的理想选择。CD833X型放大器具有出色的共模抑制比，无需与传
Datasheet
PackageSOP-8
Channel 1
Supply Voltage (Min)(V) 2
Supply Voltage (Max) (V) 0.05
Offset Voltage (Max@25°C) (mV) 20
Iq/ Amp Typ (μA) 1.1
IB Typ(pA) In,Out
Rail-to-Rail I/O 1.8
ENOISE Typ@1kHz (nV/√Hz) 5.5
TC of Vos Typ(μV/°C) 0.35
GBW Typ(MHz) 0.2
Slew Rate Typ (V/μs) 25
Aol Typ(dB) EMI Hardened
CMRR Typ(dB) 70
In Noise (μVpp) 145
Additional Feature 110
Temp Range(°C) -40 to 125
Open
CD8333AST5
CD833X 系列放大器包括 CD8333, CD8336, CD8339，分别是单/双/四路运放，具有微功耗、零漂移特性的 COMS 运算放大器，该放大器提供 350 kHz 带宽，轨至轨输入输出和单电源供电，供电范围从 1.8V 到 5.5V。CD833X 使用斩波稳定技术提供低失调电压（最大电压小于 10µV）、超过工作温度时接近零漂移。其每个放大器20µA 的低静态电源电流和低至 20pA的输入偏置电流，是满足低偏移、低功耗、高阻抗应用的理想选择。CD833X型放大器具有出色的共模抑制比，无需与传
Datasheet
PackageSOT23-5
Channel 1
Supply Voltage (Min)(V) 2
Supply Voltage (Max) (V) 0.05
Offset Voltage (Max@25°C) (mV) 20
Iq/ Amp Typ (μA) 1.1
IB Typ(pA) In,Out
Rail-to-Rail I/O 1.8
ENOISE Typ@1kHz (nV/√Hz) 5.5
TC of Vos Typ(μV/°C) 0.35
GBW Typ(MHz) 0.2
Slew Rate Typ (V/μs) 25
Aol Typ(dB) EMI Hardened
CMRR Typ(dB) 70
In Noise (μVpp) 145
Additional Feature 110
Temp Range(°C) -40 to 125
Open
CD8333ASC5
CD833X 系列放大器包括 CD8333, CD8336, CD8339，分别是单/双/四路运放，具有微功耗、零漂移特性的 COMS 运算放大器，该放大器提供 350 kHz 带宽，轨至轨输入输出和单电源供电，供电范围从 1.8V 到 5.5V。CD833X 使用斩波稳定技术提供低失调电压（最大电压小于 10µV）、超过工作温度时接近零漂移。其每个放大器20µA 的低静态电源电流和低至 20pA的输入偏置电流，是满足低偏移、低功耗、高阻抗应用的理想选择。CD833X型放大器具有出色的共模抑制比，无需与传
Datasheet
PackageSC70-5
Channel 1
Supply Voltage (Min)(V) 2
Supply Voltage (Max) (V) 0.05
Offset Voltage (Max@25°C) (mV) 20
Iq/ Amp Typ (μA) 1.1
IB Typ(pA) In,Out
Rail-to-Rail I/O 1.8
ENOISE Typ@1kHz (nV/√Hz) 5.5
TC of Vos Typ(μV/°C) 0.35
GBW Typ(MHz) 0.2
Slew Rate Typ (V/μs) 20
Aol Typ(dB) EMI Hardened
CMRR Typ(dB) 70
In Noise (μVpp) 145
Additional Feature 110
Temp Range(°C) -40 to 125
Open
Recommended
Precision OpAmps CD27G
Low noise, high voltage，precision operational amplifier
Read more
Precision OpAmps CD27A
Low noise, high voltage，precision operational amplifier
Read more
Precision OpAmps CD8564
Rail to rail input/output, 11MHz quad channel operational amplifier
Read more
Precision OpAmps CD8562
Rail to rail input/output, 11MHz dual channel operational amplifier
Read more
Precision OpAmps CD8561
Rail to rail input/output, 11MHz single channel operational amplifier
Read more
Precision OpAmps CD8514
40μA. RRIO, zero drift quad channels operational amplifier
Read more