CD9002A-56ILG USB 2.0 peripheral controller with 16K RAM, 40 GPIOs, and serial debugging-ChisynV Microelectronics (Beijing) Co., Ltd.

CD9002A series is a USB microcontroller based on the enhanced 8051 core in line with the industrial standard. It supports two modes of USB2.0 protocol, high-speed 480mbps and full-speed 12mbps. The enhanced 8051 can work at 48, 24 and 12Mhz frequencies; Each instruction cycle is 4 clocks, which is 3 times the speed of the standard 8051. CD9002A series has built-in up to 16K bytes of on-chip SRAM space, which can be used to store user code or data. CD9002A series provides UART, I2C, GPIO and other common low-speed communication interfaces other than USB interface for communication with other peripherals. CD9002A series supports powerful data transmission functions such as SlaveFIFO and PIF (programmable interface), Based on the CD9002A series firmware framework provided by Corebai, it can achieve data transmission capacity of more than 50MB / s, and the maximum bandwidth is USB2.0.

Parameters

Enhanced 8051 kernel compatible with industry standards
Power on reset (POR), external RESET input
Supports suspend mode, with a minimum power consumption of 1mA
Supports standard USB2.0 protocol
Up to 5 groups with a total of 40 bidirectional IOs (only supported for 100pin)
Supports 3 16 bit counters/timers

Features

兼容工业标准的增强型8051内核
上电复位（POR）、外部RESET输入
支持挂起模式，功耗最低不超过1mA
支持标准的USB2.0协议
24个IO
支持3个16位计数器/定时器

Application

Sensor applications
Portable video devices
Data acquisition system
Memory, card reader
Laser engraving equipment
VGA video capture and transmission equipment, etc
Industrial cameras or video surveillance equipment
ATA interface, such as IDE hard drive
Scanner
Portable sound card or MP3 playback device

Parameters

MALL MALL

Part Number

Package

Supply Voltage (V)

Interface

Protocol

Core Processor

RAM Size

I/O Count

Temp Range(°C)

Open

CD9002A-56ILG

CD9002A 系列是基于符合工业标准的增强型 8051 内核的 USB 型微控制器。支持 USB2.0 协议高速 480Mbps 以及全速12Mbps 两种模式。增强型 8051 可工作在 48、24、12MHz 频率下;每个指令周期为 4 个时钟，是标准 8051 速度的 3 倍。CD9002A 系列内置高达 16K 字节的片上 SRAM 空间，可以用来存放用户 code 或 data。 CD9002A 系列提供除 USB 接口以外的 UART、I2C、GPIO 等常用低速通信接口，用于和其他外设

Datasheet

PackageQFN-56

Supply Voltage (V) 3

Interface 3.6

Protocol 8051

Core Processor ROMless

RAM Size 16K x 8

I/O Count I²C, USB, USART

Temp Range(°C) -40 to 105

Open

Recommended

USB Controller CD9002A-56SCG

USB 2.0 peripheral controller with 16K RAM, 40 GPIOs, and serial debugging

USB Controller CD9002A-56ISG

USB 2.0 peripheral controller with 16K RAM, 40 GPIOs, and serial debugging

USB Controller CD9002A-56BCG

USB 2.0 peripheral controller with 16K RAM, 40 GPIOs, and serial debugging

USB Controller CD9002A-56IBG

USB 2.0 peripheral controller with 16K RAM, 40 GPIOs, and serial debugging

USB Controller CD9002A-56LCG

USB 2.0 peripheral controller with 16K RAM, 40 GPIOs, and serial debugging

USB Controller CD9002A-100TCG

USB 2.0 peripheral controller with 16K RAM, 40 GPIOs, and serial debugging

CD9002A-56ILG | CAD Modle