The CD600X family can be used as plug-in replacements for many commercially available op-amps to reduce power and improve input/output range and performance. The combination of features makes the CD600X ideal choices for motor control and portableaudio amplification, sound ports, and other consumer Audio. The CD600X Op-amp is very stable, and it is capable of driving heavy capacitive loads such as those found in LCDs. The ability to swing rail-to-rail at the inputs and outputs enables designers to buffer CMOS DACs, ASICs, or other wide output swing devices in single-supply systems.
-
Channel: 4
- Offset Voltage(Max@25℃)(mV) :3
- Quiescent Current/Amplifier(Typ)(μA):80
- Supply(Min)(V):2.1
- Supply(Max)(V):6
- Gain-Bandwidth Product(Typ)(MHz):1
- Slew Rate(V/ms):700
- Input/Output:rail to rail
- Input Offset Voltage Average Drift(μV/℃):2
- Input Voltage Noise Density(@1kHz)(nV/√Hz):27
- Input Bias Current(pA):1
- Open-Loop Voltage Gain(Typ)(dB):110
-
Common-Mode Rejection Ratio(Typ)(dB):100
- Special performance:EMI Hardened
-
Low Quiescent Current: 80 µA/amp
-
Supply Voltage: 2.1V to 6.0V
-
Input Voltage Noise Density: 27nV/√Hz at 1 kHz
-
Rail-to-Rail Input and Output
-
Gain Bandwidth: 1 MHz
-
Slew Rate: 0.7V/μs
-
Low Offset Voltage: ±3mV Maximum
-
Offset Voltage Temperature Drift: 2μV/°C
-
Extended Temperature Range: –40°C to +125°C
-
Sensor Interface
-
Smoke/Gas/Environment Sensors
-
Portable Instruments and Mobile Device
-
Active Filters, ASIC Input or Output Amplifier
